http://WWW.INNOTECHMACHINES.ORG
INNOTECHENGINEERING 58e759a04ba989053871255e False 153 32
OK
background image not found
Found results for
'surface'
Tray sealing machine INR   40000 INR  32000
-20%

Tray sealing machine

FS - 300, Max container size 300 x 235 MM, Sandwiched Element Heating mould, Cam based operation to get required seal pressure, Cushioned support in base mould for sealing surface, Ideal for ready Meals , Capacity 150 - 200 packs/HR

INR 32000 INR 40000

Availability:True

Pay mode:COD only

view details
Tray sealing machine INR   40000 INR  32000
-20%

Tray sealing machine

FS - 300, Max container size 300 x 235 MM, Sandwiched Element Heating mould, Cam based operation to get required seal pressure, Cushioned support in base mould for sealing surface, Ideal for ready Meals , Capacity 150 - 200 packs/HR

INR 32000 INR 40000

Availability:True

Pay mode:COD only

view details
Tray sealing machine INR   40000 INR  32000
-20%

Tray sealing machine

FS - 300, Max container size 300 x 235 MM, Sandwiched Element Heating mould, Cam based operation to get required seal pressure, Cushioned support in base mould for sealing surface, Ideal for ready Meals , Capacity 150 - 200 packs/HR

INR 32000 INR 40000

Availability:False

Pay mode:COD only

view details
Hardness Testing INR   0 INR  0
-NaN%

Hardness Testing

Rockwell & Rockwell Superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value. Brinell test consists of forcing a hardened ball into surface of a test piece with a specified test-force and measuring the diameter of indentation for evaluation of Brinell hardness number. Operation : For Rockwell & Rockwell Superficial Test : In case of 'RASN' series machines for Rockwell & Rockwell superficial tests a preliminary test force in first applied and then indicator is automatically set for zero. Quickly thereafter an additional test force is applied without removing the preliminary test force. When the penetration is stabilised, the additional test force is removed and the hardness number is shown directly on the indicator. For Brinell Test : The operation is exactly same as above. However, the diameter of impression is measured outside of machine by Brinell microscope. Brinell hardness number is found out by referring corresponding hardness tables showing hardness number against dia. of indentation for specified ball diameter and test force.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false